Adhesive for high temperatures RC18 is available in constructions with white and silver PET foil, as well as with white PP foil.
TEMPERATURE: min. labeling: 5℃, after labeling from -40℃ to 100℃ for PP foil, 175-200℃ for PET.
ADHESION: 20n.
2-year warranty, tests confirm that it does not lose its properties after 5 years.
Best resistance of the adhesive to alcohols. NOT SUITABLE for printing in laser and inkjet printers.
Application: Wine, brewing. Resistant to alcohols. For freezing. Outdoor, waterproof adhesive, resistant to weather conditions. For labeling durable goods characterized by good print resistance to chemicals, UV radiation, heat and humidity. For marking shelves. SURFACE: Rigid.
Adhesive on: pet, pp, HDPE / PE, pvc, glass, metal.
For protective applications. Durable goods. For marking shelves
Adhesive for high temperatures RC20 is available in constructions with white and silver PET foil.
TEMPERATURE: min. labeling: 5℃, after labeling from -40℃ to 150℃.
ADHESION: 22n.
2-year warranty.
NOT SUITABLE for printing in laser and inkjet printers.
Application: For freezing. Outdoor, waterproof adhesive, resistant to weather conditions.
SURFACE: Rigid.
Rubber adhesive RH1 is available in constructions with raw materials: GLOSS paper, MAT paper, ECO thermal paper, TOP thermal paper, TH TOP BOARD 105gram cardboard, white PP foil 60.
SPECIFICATION - FOR FREEZING:
-
CHARACTERISTICS: Rubber, meltable, for freezing (cheaper) - Rh1
-
APPLICATION: Recommended for use in refrigeration conditions, on wet surfaces. High initial adhesion. After labeling, it behaves very well at low temperatures. The difference between the adhesive for freezing and deep freezing is that labels for DEEP freezing can be labeled and applied in freezers / refrigerators. Unfortunately, this adhesive is not suitable for labeling in freezers below -5 degrees.
-
POSSIBILITIES: Certificate for direct contact with food articles (dry, moist and non-greasy). Not suitable for labeling PVC.
-
TEMPERATURES:
-
minimum labeling: -5
-
minimum after labeling: -40
-
maximum after labeling: 50 (such labels are not suitable for the sun, the adhesive is meltable under the influence of temperature)
ADHESION: 25n.
2-year warranty.
It does not lose its properties after 7-9 years.
Application: Food industry. For freezing. For non-polarized surfaces (plastic), for cardboard in a cold room. For marking food, barrier from the top and bottom.
SURFACE: Flat.
Rh3 adhesive for frosted surfaces is available in constructions with: TOP thermal paper.
TEMPERATURE: min. labeling: -25℃, after labeling from -40℃ to 60℃.
ADHESION: 8n.
Avoid UV light.
Application: Food industry. For freezing. For frosted surfaces. Combined with paper and matte foil. .
SURFACE: Flat.
Rh7 adhesive for difficult surfaces is available in constructions with: GLOSS paper, TOP thermal paper, white PP film 60 grams, POLYPRINT100,
TEMPERATURE: min. labeling: 5℃, after labeling from -20℃ to 50℃.
ADHESION: 30n.
Do not expose to direct UV and high temp. for a long time. Not suitable for labeling PVC surfaces.
Application: Outdoor, waterproof adhesive, resistant to weather conditions. Waterproof. Exceptional adhesion to paper and film, high initial adhesion, ideal for rough surfaces, curved.
SURFACE: Flat, curved, rough.
Adhesive on: pet, pp, HDPE / PE, paper
RH9 rubber adhesive is available in constructions with: GLOSS paper, MAT paper, ECO thermal paper, TOP thermal paper standard and NEXT FOOD version, PP200 SYNTHERMAL film.
ADHESION: 17n. 2-year warranty. Does not lose its properties even after 13 years.
Avoid UV light and chemicals.
Application: Food industry. For freezing. Non-polarized (PP and HDPE plastic)
SURFACE: Adhesive on pet, pp, HDPE / PE, pvc, food.
SPECIFICATION - PAPER CONSTRUCTION:
-
CHARACTERISTICS: Flammable, rubbery, for paper
-
APPLICATION: Recommended for use in low temperature and refrigeration conditions. On moist surfaces where high initial adhesion is required. After labeling, it behaves properly at low temperatures.
-
POSSIBILITIES: Certificate for indirect contact with food. Not suitable for labeling PVC. Not recommended for printing on the glue side.
-
TEMPERATURES:
-
minimum labeling: 0
-
minimum after labeling: -40
-
maximum after labeling: +50 +60 (which means that the adhesive is flammable under higher temperature, so be careful with exposing them to sunlight)
SPECIFICATION - FILM CONSTRUCTION:
-
CHARACTERISTICS: Rubbery, for film
-
APPLICATION: For low temperatures. High initial adhesion to surfaces. Mainly for plastic containers and difficult surfaces (cans, barrels).
-
POSSIBILITIES: Not recommended for printing on the glue side. High initial and final adhesion. For rough surfaces (PP and PE). Medium resistance to sunlight and higher temperatures. ISEGA certificate allowing contact with food. Store at room temperature 20-24 degrees.
-
TEMPERATURES:
-
minimum labeling: 0
-
minimum after labeling: -20
-
maximum after labeling: 70
RP30 wine glue is available in various constructions for wines: KRAFT BROWN, …
TEMPERATURE: min. labeling: 5℃, after labeling from -20℃ to 80℃.
ADHESION: 15n.
Not suitable for applications where washable properties are required. The glue contains latex. For BEERS (S7400) WINES (S7450).
Application: Wine, brewing. Resistant to alcohols. Outdoor, waterproof glue, resistant to weather conditions. Allows cooling of bottles. Provides good adhesion to polarized surfaces and tolerance to temperature and humidity fluctuations on the production line.
SURFACE: Rigid.
Adhesive on: glass
RP31 PURUS adhesive for pharmacy small vials is available in construction with: Pharmagloss paper.
PURUS SPECIFICATION:
-
CHARACTERISTICS: Acrylic, water-based, permanent adhesive.
-
APPLICATION: It has been developed in accordance with the requirements of the pharmaceutical industry regarding low leaching values and very good adhesion properties in the case of surfaces with a large curvature, cylindrical shape e.g. test tubes. The diameter of the packaging should not exceed min. 20 mm. to ensure adequate adhesion properties. This adhesive has good adhesion properties to glass, polyethylene and polypropylene surfaces. It can be used in sterilization processes (electron beam action, gamma radiation, ethylene oxide). Good adhesion to all surfaces, including materials with high curvature (special top material, has an appropriate fiber structure). It behaves well at low temperatures. It has a certificate for direct contact with food (dry, wet, fat-free). It can be used to label blood bags.
-
POSSIBILITIES: For labeling strongly curved surfaces. It has a certificate for direct contact with dry, wet and fat-free food.
-
TEMPERATURES:
-
minimum labeling: +10
-
minimum after labeling: -40
-
maximum after labeling: +100
ADHESION: 12n.
2-year warranty.
Application: Pharmacy and medicine. For freezing. For blood bags, ATEST for blood and plasma bags. For small diameters and curved surfaces. SURFACE: Small diameter, syringes, vials.
Adhesive on: pet, pp, HDPE / PE
Adhesive for greasy surfaces RP36FG is available in the FOODgloss paper construction.
TEMPERATURE: min. labeling: 5℃, after labeling from -40℃ to 80℃.
ADHESION: 12n. 2-year warranty.
Application: For freezing. For greasy surfaces.
SURFACE: Uneven.
Acrylic adhesive RP37 for foil. CONSTRUCTIONS: White PP film 60, White PE film 85, PE85 opaque film, Raflex Clear film, Raflex white film, White PP film 40, PP 50 clear film, Matte PE 85 film, Silver PP 50 film.
TEMPERATURE: minimum labeling: 5℃, after labeling from -20℃ to 100℃ (80 depending on the raw material). ADHESION: 10n. 2-year warranty. It does not lose its properties even after 7-8 years. Resistant to water, oils and chemicals. UV resistant. Application: SURFACE: Flat. Adhesive on: pet, pp, HDPE / PE, glass, metal
Acrylic adhesive RP37s for foil. CONSTRUCTIONS: Brushed silver film, PET extra wH, Raflacoat Plus.
TEMPERATURE: minimum labeling: 5℃, after labeling from -40℃ to 100℃. ADHESION: 12n. 2-year warranty. Application: For freezing. For use with foils. Polarized and unpolarized (plastic bottles), Resistant to water, oils and chemicals. UV resistant. Not for food. SURFACE: Flat. Adhesive on: pet, pp, HDPE / PE, glass, metal
