Paper labels GLOSS (without overprint)

GLOSS semi-gloss self-adhesive paper labels (coated) are excellent for thermal transfer printing, i.e., using dye ribbons. They are made of high-gloss coated material. The material comes from sustainably managed forests with FSC and PEFC certification. They provide high-quality prints and barcode readability. GLOSS labels can be pre-printed in color using flexographic printing. Recently, biodegradable adhesive constructions have appeared on the market. This material is smooth and non-absorbent, which allows for good finishing effects using cold stamping and cold lamination. Standard semi-gloss labels do not adhere well to uneven surfaces; it is best to test samples for a given non-flat surface unless wrinkles appear during application. Wrinkles can be avoided by using thicker materials or an appropriate automatic applicator.

APPLICATION: They are most commonly used to mark products. These are general-purpose labels used in almost all industries. GLOSS paper has a coated surface that is not absorbent; unfortunately, stamping does not work because the print smears and writing on this surface with a pen is difficult.

THERMAL TRANSFER PRINTING WITH TTR FILM.

Variable information, additional data, and barcodes are printed using thermal transfer technology. Gloss semi-gloss coated paper is best printed with wax-resin and resin ribbons due to the print’s abrasion resistance. We do not recommend printing with the cheapest dye ribbons. However, despite recommendations on semi-gloss GLOSS paper labels for economic reasons, customers often print with cheap wax thermal transfer ribbons.

APPLICATIONS WITH ADHESIVE.

• standard - acrylic (most popular), for labeling above 0 degrees Celsius.

• strong rubber, meltable permanent. Used in refrigeration conditions, high initial adhesion, for labeling above 0 degrees,

• for freezing and deep freezing, meltable, for labeling at temperatures below 0 degrees,

• removable

• adhesive with increased weight for marking difficult surfaces,

• adhesive for marking fabrics that does not leave glue marks,

• OPAQUE type, cover, covering,

• biodegradable adhesive - biocompostable or recycled,

• adhesive for application on bottles with a small diameter below fi 40mm. for pharmacy,

• adhesives for high temperatures, for sterilization in an autoclave,

• water-soluble adhesive that falls off the surface under the influence of water or agents without leaving glue marks.

Sample are available on request.